A turbo boost for LNG

Demand for LNG is rising, in power generation and marine. ABB Turbocharging is pushing the technology - and providing advanced services to keep it running.

Natural gas, cooled to –162°C and liquefied, is arguably the most discussed fossil fuel today, and it is likely to remain so in the coming years. Industry in general continues to favor it as an environmentally attractive alternative to other hydrocarbon fuels.

In fact, ABB Turbocharging has delivered over 1,700 large and small turbochargers for more 1,100 engines powered with liquified natural gas, so far.

Natural gas is the preferred choice for electric power generation and industrial sectors because of its low greenhouse emissions – a result of its lower carbon intensity in comparison with coal and oil. And for new power generation plants it is especially attractive because of the relatively low capital investment needed.

Also, abundant natural gas resources and stable production contribute to the strong competitive position of natural gas among all the available energy sources.

This trend is clearly visible in the medium- and large-bore power generation market, where the volume of newly produced diesel fueled engines has dropped significantly since the introduction of the new spark-ignited lean burn gas engines and multi-fuel engines.

Highly flexible, reliable

Another clear trend in the global energy market, and especially in electricity generation, is the need for increased flexibility, reliability and fuel efficiency, to be available over a wide load range.

These requirements can no longer be met by traditional “inflexible” gas turbines, and it is here that the highly efficient gas engines have a key advantage. A multiple engine setup easily outperforms the traditional gas turbines by enabling an existing power system to operate at maximum efficiency.

It does this by effectively absorbing system load variations, allowing a significant saving at the system level, and therefore for consumers.

A 2012 study of the California power system by the energy consultancy DNV KEMA showed that adding highly efficient gas engines, instead of traditional, inflexible gas turbines with high start-up costs, enables up to 12 percent of the annual system costs to be saved.

Environmentally relevant – for multiple industries

This increasing importance of natural gas is not only evident in the power generation industry.

The marine sector, too, has taken note of its environmentally and commercially attractive benefits compared with other fossil fuel solutions. With natural gas as fuel, NOx emissions are reduced by 85 percent and sulfur dioxide and particulates are practically non-existent compared with traditional diesel engines.

The key commercial benefit is that no additional, expensive, after-treatment systems are required to meet the new regulations coming into force. Looking at the total cost of ownership, natural gas is potentially a more attractive solution for meeting new emission regulations than any kind of diesel configuration.

While dual-fuel engines are already widely used in the LNG carrier market, pure spark ignited gas engines still tend to be rare in the marine sector.

Although operators of ferries, cruise vessels, offshore support vessels and others are showing a growing interest in this technology, the LNG boom in the marine sector for non-LNG carriers is progressing more slowly than was anticipated.

This is mainly due to the IMO Marine Environment Protection Committee’s decision to enforce new regulations for ships’ NOx emissions in 2016 for already designated NOx Emission Control Areas (NECA) only.

Another reason is the lack of a global LNG infrastructure, which is currently limited to specific regions.

Increased engine output

ABB Turbocharging actively supports the gas and dual-fuel engine development trends through the introduction of technologies that include high pressure, high efficiency two-stage turbocharging (Power2) as well as Valve Control Management.

These technologies offer the possibility of in­creasing engine output and operational flexibility, enabling fixed-pitch propeller operation and allowing an increase in engine efficiency.

ABB turbochargers are deployed across the medium-speed gas and dual-fuel engine market, covering a broad range of marine and power plant applications. ABB Turbocharging also has well-established maintenance management agreement packages, such as the Operation Performance Package (OPAC), that fully support these markets.

OPAC enables customers to maintain highest plant efficiency, flexibility and “up time,” through monitoring, planning and completion of turbocharger maintenance at a fixed price per running hour – a key factor in today’s market environment.

Categories and Tags
About the author

Marco Burgwal

Marco Burgwal graduated in 1995 in Naval Architecture and Marine Engineering in Haarlem, The Netherlands. He worked as a technical superintendent at a Dutch shipping company before joining ABB Turbocharging in 2002. After a six-year spell in Japan that included heading the West Japan turbocharger service business, he returned in 2008 to join the global medium-speed sales and application engineering department in Baden, Switzerland, which he has headed since 2011.
Comment on this article